Hey ! ! ! ! !

Thread Tools
  #51  
Old 01-20-2009, 11:11 PM
mike3fan's Avatar
Senior Board Member
Join Date: Aug 2006
Location: michigan
Posts: 2,777
Default

this seems much easier and faster,rescue tape

Home
 
__________________
"I love college football. It's the only time of year you can walk down the street with a girl in one arm and a blanket in the other, and nobody thinks twice about it." --Duffy Daugherty



Last edited by mike3fan; 01-20-2009 at 11:14 PM.
  #52  
Old 01-22-2009, 01:51 AM
Windwalker's Avatar
Board Icon
Thread Starter
Join Date: Oct 2005
Location: Been there and gone...
Posts: 6,412
Default

Skywalker, that is exactly what I was talking about at the beginning of this thread. I have two in my tool box right now, along with 4 clamps for them.

A screw into the hole is not likely to work. Once the hose has begun to wear through, the wall of the hose is too thin to support a screw. You could end up with an UN-GUIDED MISSILE instead of a repair. Watch out for the RICK-O-SHAY...

mike3fan, I've heard of that "RESCUE TAPE" before, but never looked into it. To be able to withstand 700 PSI is respectable... But, if you can stretch it by hand, 120 PSI of air pressure is likely to stretch it out enough that air will do the same, and air will leak out where the tape could pull away from the hose. A few wraps, and a couple of hose clamps could be a good answer, if it's all it's cracked up to be.
 
__________________
( R E T I R E D , and glad of it)
YES ! ! ! There is life after trucking.
a GOOD life

  #53  
Old 01-22-2009, 06:35 PM
b00m's Avatar
Board Regular
Join Date: Apr 2008
Posts: 241
Default

Okay,

Enough with the engineering advice cause my head hurts(JK).... but i wanted to add this if in case it wasnt mentioned.Make sure u have some rubbing alcohol(not to drink)but to pour into the air lines in case condensation turns into water and freezes.Just happened to me last night when the temp was around 5-10 degrees.It saved my day when i got my brakes unlocked from my trailer.

TY
 
  #54  
Old 01-23-2009, 01:05 AM
Windwalker's Avatar
Board Icon
Thread Starter
Join Date: Oct 2005
Location: Been there and gone...
Posts: 6,412
Default

Originally Posted by b00m
Okay,

Enough with the engineering advice cause my head hurts(JK).... but i wanted to add this if in case it wasnt mentioned.Make sure u have some rubbing alcohol(not to drink)but to pour into the air lines in case condensation turns into water and freezes.Just happened to me last night when the temp was around 5-10 degrees.It saved my day when i got my brakes unlocked from my trailer.

TY
Rubbing alcohol can work, but get the 91%, rather than the 70%. The greater the alcohol content, the better results you will get. However, truck stops do sell "AIR-LINE ANTI-FREEZE", which is formulated for the air lines. Rubbing alcohol can work in a pinch, but get the right stuff.
 
__________________
( R E T I R E D , and glad of it)
YES ! ! ! There is life after trucking.
a GOOD life

  #55  
Old 01-24-2009, 05:26 AM
BluHeeler's Avatar
Member
Join Date: Dec 2005
Location: Orygun
Posts: 138
Default

Windwalker, you're a pro. It's so rare these days.

I'm usually one of the first ones up in truck stops as I like to be the first one at a shipper or receiver. I make my coffee around 3:30 or 4, depending on the time zone I'm in.... I log from the west coast. I will guarantee you that 99.8% of drivers do absolutely no pretrip. None, not a look......most of you.

I require myself and my trainees to look at a minimum, Fluids, belts, lights and tires and a general walk around. That will catch most, not all of the issues that will shut you down on the road or at a scale.

Most drivers start the truck and drive away, stopping only if a tire blows or a DOT person points something out.

WindW once again you are a rare professional.......nice.
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT. The time now is 06:12 PM.

Top