Roadside and Tx Dot
#1
12-15-2007, 03:10 AM
Roadside and Tx Dot
Texas dot gives a new meaning to roadside inspections. I got hit up with a level 2 last night just east of Madisonville on state highway 21. Actually did an inspection in the ditch after dark. All was well though. He found one minor problem on my load securement that did not even result in an out of service. He said the rest of the load was secured "very well" and that this would make no real difference on the load being secure or not. Remember, when Texas says "Roadside" they mean roadside!!!!!
__________________
Hammer Down!!!!! 
#2
12-15-2007, 04:36 AM
Senior Board Member
Join Date: Jan 2005
Location: The Great State of Texas - Seguin
Posts: 741
Re: Roadside and Tx Dot
Glad all worked out for ya! The last several months, Texas' roadside inspections have greatly increased! We have contributed much of it to the increase Mexican truck traffic in the state! Even though the FMCSA has only publicly stated a limited number of trucks coming in, they cannot tell me, a driver that spends most of my time in the south and central Texas area, that there are not more than they say.
A bulletin that I found the other day, also showed, in the works, 9 new permanent scale locations with inspection pits, much like the revamped scale on SB I 35 below San Antonio. Not to mention, the increase CMV inspections done by each and every county in the state now. As your post shows, if all is in order, and you are courteous to the officer, then you will be on your way in know time. I think I may have passed you on the highway when that was going down! Was it around 7:45? There was one on the side when I was coming back from Nacodoches around that time. Later!
Originally Posted by chuck3507
Texas dot gives a new meaning to roadside inspections. I got hit up with a level 2 last night just east of Madisonville on state highway 21. Actually did an inspection in the ditch after dark. All was well though. He found one minor problem on my load securement that did not even result in an out of service. He said the rest of the load was secured "very well" and that this would make no real difference on the load being secure or not. Remember, when Texas says "Roadside" they mean roadside!!!!!
__________________
"I discover the principles that work and work them, I am forever learning new principles that interaccomodate with what I already know, to the betterment of my life and my world. As principles are revealed to me, I cheerfully record them, use them, and share them. Principles are, without question, the fastest way to what I want." Author Unknown OOIDA
#4
12-15-2007, 01:25 PM
Senior Board Member
Join Date: Jan 2005
Location: The Great State of Texas - Seguin
Posts: 741
Originally Posted by chuck3507
Yep 7:30-8:00 on SH21 just east of Madisonville. Were you there? I had a flatbed load of steel trusses.
Did you load at the plant at Madonsonville? I travel that stretch allot delivering to drilling platform sites. Was actually on my way back from Alto that night, just used Nacodoches, since nearly nobody knows where Alto, TX is! OH well!
__________________
"I discover the principles that work and work them, I am forever learning new principles that interaccomodate with what I already know, to the betterment of my life and my world. As principles are revealed to me, I cheerfully record them, use them, and share them. Principles are, without question, the fastest way to what I want." Author Unknown OOIDA |
|
