Ohtsu, Toyo, or Double Coin?

Thread Tools
  #1  
Old 03-28-2007, 04:59 PM
Mountain Flyer's Avatar
Board Regular
Thread Starter
Join Date: Oct 2005
Location: Boise, Idaho
Posts: 215
Default Ohtsu, Toyo, or Double Coin?

Hey Fellers,

I am headed to the tire shop today for a new set of drive tires. Just wondering if anyone has anything good or bad to say about the above tires. Toyos are most expensive; Ohtsu in the middle of the pack, and the Double Coins are the least expensive... comments? :?
 
__________________
"It is not the critic who counts,
not the man who points out how the strong man stumbled,
or where the doer of deeds could have done better.
The credit belongs to the man who is actually in the arena;
whose face is marred by the dust and sweat and blood;
who strives valiantly; who errs and comes short again and again;
who knows the great enthusiasms,
the great devotions and spends himself in a worthy course;
who at the best, knows in the end the triumph of high achievement,
and who, at worst, if he fails, at least fails while daring greatly;
so that his place shall never be with those cold and timid souls
who know neither victory or defeat."

Theodore Roosevelt
  #2  
Old 03-28-2007, 05:16 PM
Senior Board Member
Join Date: Nov 2005
Location: Texas
Posts: 658
Default

Maybe it's just me, but I wouldn't bother with any of those. I run BFGoodrich DR444's on my drive's in an 11R 24.5, and that is all I run. Buddy of mine's dad ran Double Coin's on their trailers when they had drivers pulling them b/c they were cheap and drivers could tear them up and they wouldn't be as costly to replace. Never heard of Ohtsu so I'd rule that out. I don't go with cheap/generic...of those three, I'd go with the Toyo's if you're set on one of the above.
 
  #3  
Old 03-29-2007, 09:13 AM
Orangetxguy's Avatar
Senior Board Member
Join Date: Jan 2007
Posts: 4,792
Default

Mountain..Ohtsu is a good drive tire. You will get as good mileage out of them as you would Michelen. They make a good trailer tire as well.
 
__________________
Space...............Is disease and danger, wrapped in darkness and silence! :thumbsup: Star Trek2009
  #4  
Old 03-29-2007, 11:42 AM
GMAN's Avatar
Administrator
Site Admin
Board Icon
Join Date: Feb 2005
Location: Tennessee
Posts: 17,097
Default

I have run Toyo and they seemed to do all right. I currently have Double Coin on my International. They are doing very well. I just learned from one of their executives that International will be putting Double Coin on their trucks from the factory. I don't recall if it will be model specific or not. Double Coin is manufactured in a joint venture by Michelin and the Chinese government. I have been experimenting with various brands over the last several years. Two brands I will never own again are Kelly and Goodyear. They won't stand behind their warranties. From what I am seeing in my personal experience, the foreign brands are wearing as well, if not better than some of the American brands.
 
  #5  
Old 03-30-2007, 11:18 PM
Kranky's Avatar
Senior Board Member
Join Date: Jun 2006
Location: Wisconsin
Posts: 1,102
Default

Originally Posted by GMAN
I have run Toyo and they seemed to do all right. I currently have Double Coin on my International. They are doing very well. I just learned from one of their executives that International will be putting Double Coin on their trucks from the factory. I don't recall if it will be model specific or not. Double Coin is manufactured in a joint venture by Michelin and the Chinese government. I have been experimenting with various brands over the last several years. Two brands I will never own again are Kelly and Goodyear. They won't stand behind their warranties. From what I am seeing in my personal experience, the foreign brands are wearing as well, if not better than some of the American brands.
And if you do your own tire work, Goodyears are notoriously tough to mount on the rims.

That's not just my opinion, a lot of tire guys around here say that too.

Michelin & Bridgestone are a dream to work with, they practically fall onto the rim.
 
__________________
If you can't shift it smoothly, you shouldn't be driving it.
  #6  
Old 03-30-2007, 11:25 PM
Mackman's Avatar
Senior Board Member
Join Date: Sep 2005
Location: Concordville PA
Posts: 3,841
Default

My oldman will only run Michelin and he will only recap his caseings 1 time.
 
__________________
Truck Driving an occupation consisting of hours of boredom interrupted by sheer terror!!

"All the coolie carriers suck. Log 70, work 80-100, paid for 50." - the Great ColdFrostyMug


  #7  
Old 03-31-2007, 12:02 AM
Senior Board Member
Join Date: Aug 2005
Location: jackassville (winnipeg, mb)
Posts: 3,280
Default

+1 Michelin.

I have almost 250,000 miles on my ZXA3's. If I had kept the toe in check as well as the air pressure, I'm sure I could've hit 300,000.
 
  #8  
Old 03-31-2007, 01:35 AM
Board Regular
Join Date: Sep 2005
Location: Junction of MA CT RI (Putnam CT)
Posts: 243
Default

I have Toyo steers that seem to be doing well and have seen folks say they are the best steers but don't know about their drives? I had worn out Double Coins on the drive axle when I got the tractor and they wore evenly but I don't know how long they lasted. I too had a tire dealer tell me that Double Coins were Chinese made Michelens and that they no longer carry them because they became too expensive compared to lesser known brands. Our local Goodyear shop sells mostly Triangle brand now that nobody wants to pay $600 for a Goodyear :shock: . We haven't had any for long enough to say they are great but so far so good -we just bought two more today for a trailer for $300 each. We use steer tires on our trailers as the Goodyear trailer tires didn't last long in short haul - them tight city deliveries and too many pivot turns eat them right up :shock: .
 
  #9  
Old 03-31-2007, 01:39 AM
Board Regular
Join Date: Sep 2005
Location: Junction of MA CT RI (Putnam CT)
Posts: 243
Default

Originally Posted by Splitshifter
And if you do your own tire work, Goodyears are notoriously tough to mount on the rims.
I dismounted 4 goodyear drives from dayton wheels last fall off a junker we have and mounted them on hub piloted wheels for my tractor and they were insanely stiff for sure :shock: ! Couldn't beat the price though (free) 8) .
 
  #10  
Old 03-31-2007, 06:49 AM
heavyhaulerss's Avatar
Senior Board Member
Join Date: Jan 2007
Location: north alabama
Posts: 1,200
Default

toyos have stood up great for me on a flat spread. the gave me good long life on drives also.
 



Reply Subscribe

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT. The time now is 08:35 AM.

Top