How many driven wheels?

Thread Tools
  #1  
Old 04-08-2011, 10:27 AM
Rookie
Thread Starter
Join Date: Apr 2011
Posts: 2
Default How many driven wheels?

Ok, on your typical tandem axle tractor that has 4 sets of two wheels, how many are driven. It's been a while since I've been on a rig, but I remember an axle lock switch and also remember peeking underneath the rear and seeing two differentials. If you get stuck and start spinning, do both F and R and L and R all spin?

Thanks
 
  #2  
Old 04-08-2011, 07:07 PM
classictruckman's Avatar
Board Regular
Join Date: Jan 2010
Location: Ottawa Valley Ontario, Canada
Posts: 253
Default

Ask Mackman:thumbsup:

It depends on the setup of the truck, if it has differential locks on both axles and an interaxle lock then yes all will spin. Without a diff. lock one side left or right will spin and without an interaxle lock one axle could spin.
 
  #3  
Old 04-09-2011, 01:34 AM
Windwalker's Avatar
Board Icon
Join Date: Oct 2005
Location: Been there and gone...
Posts: 6,412
Default

Originally Posted by classictruckman
Ask Mackman:thumbsup:

It depends on the setup of the truck, if it has differential locks on both axles and an interaxle lock then yes all will spin. Without a diff. lock one side left or right will spin and without an interaxle lock one axle could spin.
I agree with you except for one point. Anytime I've found myself spinning, it's been in trying to take off. Nearly always at very low speeds. And, when I did, it was most generally opposite corners that would spin. Front left and rear right, or front right and rear left. One more note.

Absolutely, never, NEVER, NEVER lock the interaxle differential when one wheel is spinning. Not while any wheels are spinning. If you have one set of duals hanging over a pothole and spinning, hold the brake for a good 20 to 30 seconds to make sure that no wheels are turning when you engage the differential lock. If you still have a wheel spinning when you flip the switch, you will generate multiple fragments inside the differential housings, and the repair will cost thousands. If you're moving, release the throttle, press in the clutch, and flip the switch. Then let the clutch out and apply throttle.
 
__________________
( R E T I R E D , and glad of it)
YES ! ! ! There is life after trucking.
a GOOD life

  #4  
Old 04-09-2011, 04:11 AM
Rookie
Join Date: Nov 2010
Location: orofino, idaho
Posts: 35
Default

Summer before last I was leaving the local paper mill and came by this brand new pair of drivers in a bobtail swift tractor, they had missed the turn into the yard and had pulled into a pot-holed wide spot to flip a u-turn. The truck was parked with two opposite rear wheels high and dry, over two potholes. One of the guys was outside watching his partner, trying this gear and that, spinning the two sets of airborne duals. I should have stopped to show them what to do, but I was laughing so hard I just couldn't.
 
  #5  
Old 04-13-2011, 04:20 AM
Copperhead's Avatar
Senior Board Member
Join Date: Oct 2007
Location: Kellogg, IA
Posts: 534
Default

Good case for lockers on the drive axle. Of course, there are few company drivers like those at the mega carriers that would be able to use them properly without destroying a drive axle. But you won't hang up and not have any traction!
 
__________________
Freedom does not mean the choice to do whatever you want. It means the choice to do what you ought.
  #6  
Old 07-28-2011, 06:53 AM
Rookie
Join Date: Jul 2011
Posts: 13
Thumbs up Re

Hi Windwalker, I am agree, and thanks for sharing it. It is helpful to me also.


Originally Posted by Windwalker
I agree with you except for one point. Anytime I've found myself spinning, it's been in trying to take off. Nearly always at very low speeds. And, when I did, it was most generally opposite corners that would spin. Front left and rear right, or front right and rear left. One more note.

Absolutely, never, NEVER, NEVER lock the interaxle differential when one wheel is spinning. Not while any wheels are spinning. If you have one set of duals hanging over a pothole and spinning, hold the brake for a good 20 to 30 seconds to make sure that no wheels are turning when you engage the differential lock. If you still have a wheel spinning when you flip the switch, you will generate multiple fragments inside the differential housings, and the repair will cost thousands. If you're moving, release the throttle, press in the clutch, and flip the switch. Then let the clutch out and apply throttle.
 
__________________
=> Defensive Driving In Houston | defensive driving class nj
✔ 100% customer satisfaction guaranteed | ◭ Same day certification




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT. The time now is 01:34 PM.

Top